A flagship B.Tech programme, established in 2006, producing globally competent mechanical engineers through rigorous fundamentals, hands-on labs and Kerala’s only Daikin Centre of Excellence for HVAC training.
The Department of Mechanical Engineering at Toc H Institute of Science and Technology, Arakunnam, Ernakulam, successfully organized a Six-Day Faculty Development Program (FDP) on “Sustainable Materials & Manufacturing” from 02nd to 07th February 2026. The program was convened by Dr. Rajesh Kocheril, Head of the Department of Mechanical Engineering, with coordination by Dr. Lovin K John, Asst. Prof. Aby S, and Dr. K. Vinoth Babu.
This FDP was designed in alignment with the United Nations Sustainable Development Goals (SDGs 7, 9, 12, and 15), focusing on affordable energy, innovation, responsible consumption, and life on land. Over six days, the program provided participants with valuable insights into eco-friendly materials, green manufacturing techniques, life cycle assessment, and sustainable design principles. Faculty members were empowered to integrate sustainability into their teaching and research, thereby strengthening their institution’s role in advancing sustainable development. By the conclusion of the program, participants had gained practical knowledge to apply green manufacturing practices, embed sustainability concepts into curricula, and contribute to reducing environmental impact through innovative approaches.
The FDP featured lectures and interactive sessions by distinguished resource persons from premier institutions in India and abroad. Eminent speakers included:
The Department of Mechanical Engineering organized an insightful Expert Talk on “Lean Manufacturing” on 5th January 2026. The session was held in the Mechanical Seminar Hall from 11:30 AM to 12:30 PM.
The talk was delivered by Prof. Govind Bhat S, an experienced Lean Consultant & Trainer, who shared his expertise on the principles and practices of Lean Manufacturing. His lecture emphasized the importance of efficiency, waste reduction, and continuous improvement in modern industrial processes.
The program provided students with valuable exposure to industry-relevant methodologies, bridging the gap between academic learning and practical applications. Prof. Govind Bhat’s engaging presentation encouraged participants to adopt Lean thinking in their future professional endeavors.
The event was conducted under the banner of the Institution’s Innovation Council (IIC), reflecting TIST’s commitment to fostering innovation, industry collaboration, and skill development among its students.
This initiative underscores the department’s dedication to equipping budding engineers with contemporary knowledge and practices that enhance employability and professional competence
The Institution of Engineers (India), Kochi Local Centre, commemorated the 58th Engineers’ Day on 15th September 2025 with a vibrant and intellectually enriching program that brought together professionals, academicians, and aspiring engineers.
Representing our institution, two final-year students—Mr. Devan and Mr. Saran—actively participated in the celebration, gaining valuable exposure to the broader engineering community and its evolving frontiers.
A key highlight of the event was the seminar presentation by the esteemed Dr. V. Narayanan, Chairman of ISRO and Secretary, Department of Space (DoS). In his address, Dr. Narayanan provided an insightful overview of India’s recent and upcoming space missions, shedding light on ISRO’s strategic vision, technological advancements, and global collaborations. His talk encompassed landmark initiatives such as the Chandrayaan and Gaganyaan programs, satellite innovations, and the role of space science in national development.
For the student attendees, the session proved to be profoundly enriching—offering a rare opportunity to engage with cutting-edge developments in aerospace and satellite technology directly from one of the nation’s foremost scientific leaders. The interaction not only broadened their technical horizons but also instilled a deeper appreciation for the role of engineering in shaping India’s future.
A three-day intensive training program on Fusion 360 was successfully conducted from 16th to 18th October 2025 for the final-year Mechanical Engineering students, in collaboration with BIMIT Cochin, a reputed CAD/CAM training institute. The workshop provided hands-on exposure to Autodesk’s Fusion 360 platform, equipping participants with essential skills in 3D modeling, simulation, and design optimization. Through guided sessions and real-time project demonstrations, students gained practical insights into parametric design, assembly modeling, and cloud-based collaboration tools—key competencies for modern mechanical design workflows. The program not only enhanced their technical proficiency but also aligned with industry expectations, fostering readiness for professional roles in product design and manufacturing. This initiative reflects the department’s commitment to integrating advanced software training into the academic framework, thereby empowering students with future-ready capabilities.
As part of the academic–industry collaboration under the established Memorandum of Understanding (MoU) between Toc H Institute of Science & Technology (TIST) and Daikin, a one-day workshop titled Basics of Air Conditioning Systems was conducted on 18th September 2025 at the Daikin Centre of Excellence, Visveswaraya Block. The program was exclusively designed for final-year students, aligning with the institute’s commitment to providing industry-relevant training prior to graduation.
The workshop offered a comprehensive introduction to HVAC fundamentals, combining theoretical insights with hands-on training. It was facilitated by experienced resource persons from Daikin:
Students were exposed to the core components and operational principles of air conditioning systems, including system architecture, energy efficiency metrics, and maintenance protocols. The interactive sessions featured live demonstrations and guided technical walkthroughs, allowing participants to engage directly with commercial-grade equipment and diagnostic tools.
This initiative not only enhanced the students’ practical understanding but also strengthened their readiness for professional roles in HVAC and allied sectors.The Daikin Centre of Excellence continues to serve as a vital platform for experiential learning, skill development, and industry-academia integration.
Department of Mechanical Engineering in collaboration with Institution’s Innovation Council (IIC) successfully conducted Day 6 of the IP Utsav on April 26, 2025. The MIC-driven activity, titled “Patent to Product,” brought together the S2 Mechanical Engineering batch for an enlightening session at Vishveshvaraya Block, focusing on the critical journey from intellectual property protection to market-ready innovation.
The comprehensive session, aligned with the national theme “Srujanta Se Samruddhi” (Prosperity through Creativity), provided students with valuable insights into the multifaceted process of transforming patented ideas into commercially viable products. Expert presenters elucidated the strategic pathway from initial innovation conception through patent filing procedures to successful product development and market entry strategies. This knowledge transfer initiative emphasized the integral relationship between robust IP protection and sustainable business development.
Students engaged with compelling real-world case studies featuring successful startups that effectively leveraged their patented technologies to create impactful market solutions. These examples illustrated the practical challenges entrepreneurs face during commercialization and highlighted effective strategies for overcoming common obstacles in the innovation lifecycle. The session underscored how strategic IP management serves as a foundation for competitive advantage in today’s innovation-driven marketplace.
By providing exposure to both theoretical frameworks and practical implementation strategies, the IP Utsav continues to strengthen the innovation capabilities of budding engineers. The initiative reflects the departments’ dedication to cultivating entrepreneurial mindsets that can contribute meaningfully to India’s growing innovation landscape.
The Department of Mechanical Engineering successfully hosted a comprehensive two-day Faculty Development Program (FDP) focused on Autodesk’s Fusion 360 software on April 21-22, 2025. Conducted by industry experts from Bimit Labs, this intensive program provided faculty members with advanced training in cutting-edge CAD capabilities.
The hands-on workshop delivered in-depth instruction on Fusion 360’s advanced features, equipping participants with practical skills essential for modern engineering design and analysis. Faculty members engaged in interactive sessions that covered parametric modeling, simulation tools, generative design capabilities, and collaborative workflows inherent to the platform.
A significant aspect of the FDP was the strategic implementation pathway presented for integrating Fusion 360 into the department’s regular curriculum. The instructors from Bimit Labs outlined systematic approaches for incorporating this industry-standard software into laboratory coursework, ensuring students gain relevant technological competencies demanded by today’s engineering industry.
The Department of Mechanical Engineering, in collaboration with the Training Division of Armstech Engineers Private Limited, successfully conducted a two-day technical workshop on Mechanical Construction and Industrial Safety on March 6th and 7th, 2025. This comprehensive program was designed to provide participants with in-depth knowledge and practical skills essential for the mechanical construction industry. The workshop commenced with an introduction to mechanical construction, covering its various sectors, departments, activities, and job opportunities. A strong emphasis was placed on industrial safety, including the use of PPEs, work at height safety, and understanding MSDS, PTW, RA, JSA, WMS, and TBT.
The second day focused on specialized areas such as Piping Fabrication & Pipe Fittings, Piping Construction, and Steel Structures. Participants gained insights into pipe manufacturing methods, piping codes and standards, and pipe fittings and components. Practical sessions on pipe fabrication, including welding and fit-up, were conducted, along with detailed explanations of pipe drawings, including Isometric, GID, and P&ID. An engaging isometric drawing illustration session with a piping kit was also included. The workshop concluded with an introduction to steel structural members and fabrication.
The workshop was led by a team of highly experienced trainers from Armstech Engineers Private Limited. Aravinth B, Head-Training, with expertise in Manufacturing and safety certifications, led the sessions. Anoop Chandran, a Senior Inspection Engineer, along with Rohit R Nair, Project Engineer, Piyush Ponnappan, Senior Oilfield Engineer, Noble Mathew, Senior MEP Engineer, Adarsh Kumar, Inspection Engineer, Shemim Muhammed, Senior NDT Engineer, and Arif Khan Shajahan, Junior NDT Engineer, contributed their specialized knowledge.
Department of Mechanical Engineering recently hosted an impactful awareness program on Assistive Technology for its second and third-year students. Conducted on February 17, 2025, the program was led by experts from the National Institute of Speech and Hearing (NISH), Thiruvananthapuram, offering students valuable insights into the world of technology designed to empower individuals with special needs.
The program featured presentations by R. Deepu Raj, Senior Engineer at the Center for Assistive Technology and Innovation (CATI), NISH, and Muhammed Janish, Project Research Scientist at NCAHT. These experts showcased a variety of assistive devices and systems, highlighting their potential to significantly improve the quality of life for people with disabilities. Students were introduced to cutting-edge technologies that aid in communication, mobility, and daily living, opening their eyes to the possibilities of innovation in this critical field.
Beyond showcasing existing technologies, the program also emphasized the potential for student involvement in assistive technology development. The NISH experts encouraged students to explore research projects and initiatives focused on creating and improving assistive devices, inspiring them to contribute to this impactful area.
A key highlight of the program was a sensitization initiative where student volunteers were blindfolded and assigned tasks. This immersive experience provided a firsthand understanding of the challenges faced by visually impaired individuals, fostering empathy and a deeper appreciation for the importance of assistive technology.
This Assistive Technology Awareness Program proved to be a resounding success, raising awareness, sparking interest, and potentially inspiring future innovators at Department of Mechanical Engineering to contribute to the field of assistive technology.
Department of Mechanical Engineering, in collaboration with the Institution’s Innovation Council (IIC), successfully conducted a seminar on “Basics of Intellectual Property Rights and its Importance for Innovators” on November 30th. This insightful session, held in a hybrid format, aimed to educate and empower students, faculty, and aspiring innovators with a foundational understanding of intellectual property (IP) and its crucial role in fostering innovation. The seminar was a part of the Ministry of Education’s initiative to promote innovation and entrepreneurship within educational institutions.
The event featured a comprehensive presentation by Mr. Lovin K John, Assistant Professor at Toc H Institute of Science and Technology. Mr. Lovin’s expertise in the field of IP was evident as he delved into the intricacies of various IP rights, including patents, copyrights, trademarks, and trade secrets. He elucidated the significance of these rights in protecting innovative ideas and creations, thereby encouraging a culture of research and development. The seminar provided a platform for participants to gain practical knowledge on how to navigate the IP landscape, a vital skill for anyone involved in innovation and entrepreneurship.
The seminar, conducted from 11:00 AM to 2:30 PM, witnessed active participation from both on-site and online attendees. The hybrid format allowed for a wider reach, ensuring that individuals who could not be physically present could still benefit from the valuable insights shared. The interactive Q&A session that followed Mr. Lovin’s presentation provided an opportunity for participants to clarify their doubts and engage in meaningful discussions. The feedback received from the attendees was overwhelmingly positive, with many expressing their appreciation for the clear and concise explanations provided.
In an era marked by unprecedented environmental challenges, MatTech 2024 emerged as a beacon of hope and innovation. Organized by the Department of Mechanical Engineering and strategically associated with ISHRAE Kochi Chapter, the conference represented a pivotal moment in addressing global sustainability concerns. The event, held on November 29th, 2024, at the Gokulam Park Hotel in Kochi, brought together a distinguished ensemble of academic researchers, industry leaders, policymakers, and technological innovators.
The conference’s primary objective was to create a comprehensive platform for exploring and discussing groundbreaking solutions to critical global issues such as climate change, resource depletion, and environmental degradation. By focusing on nine interconnected themes, MatTech 2024 demonstrated a holistic approach to sustainable technological development, bridging the gap between theoretical research and practical implementation.
The morning session was carefully choreographed to set an inspirational and intellectual tone for the conference. Beginning with a traditional prayer, the proceedings quickly transitioned into a series of strategic addresses that highlighted the conference’s importance. Dr. Rajesh Kocheril’s welcome address articulated the mechanical engineering department’s vision for sustainable technological advancement, while Er. C S Varghese’s presidential address emphasized the broader societal implications of innovative materials and technologies.
A particularly noteworthy moment was the special address by Mr. Rony Benjamin from ISHRAE Kochi Chapter, which underscored the critical role of professional associations in driving technological innovation and sustainability. The lamp lighting ceremony, a symbolic ritual representing the illumination of knowledge, served as a powerful metaphor for the conference’s mission to shed light on transformative technological solutions.
The keynote sessions represented the intellectual highlight of MatTech 2024, featuring speakers who are at the forefront of technological innovation and research. Dr. Prasad Krishna, as the director of two prestigious institutions (NIT Calicut and IIIT Kottayam), provided a comprehensive overview of the current technological landscape and future possibilities.
Mr. Ramesh Nair, representing Aptiv Connection Systems India Pvt Ltd, offered industry perspectives on sustainable technological integration, demonstrating how corporate entities can drive meaningful environmental change. Dr. Binsi P K from ICAR-CIFT brought scientific rigor to the discussions, highlighting research-driven approaches to sustainable technologies.
The final keynote by Mr. Kanu Aravindakshan explored the intersection of consulting, industry solutions, and technological innovation, providing a nuanced view of how strategic thinking can accelerate sustainable development.
The afternoon technical sessions showcased the conference’s commitment to diverse and cutting-edge research. Each presentation represented a unique approach to addressing technological and environmental challenges:
Geethu S’s presentation on the ethical implications of digital twins explored the complex moral landscape of emerging technologies. Muhammed Afnas V’s research on ion selective graphene oxide membranes demonstrated innovative material science approaches to solving environmental challenges.
Dr. Rejeesh C R’s work on fire retardant treatments for mycelium biocomposites highlighted sustainable material development, while Mr. Shajan K Thomas’s project on variable wing span RC flight illustrated innovative engineering design principles.
Other notable presentations included Mr. Arun Chand’s ergonomic research on musculoskeletal disorders, Mr. Reghuraj A R’s optimization of machining parameters, and Mr. Nidheesh P’s investigation of heat transfer enhancement. Mr. Lovin K John’s presentation on a GFRP parabolic trough solar concentrator exemplified practical renewable energy solutions.
MatTech 2024 distinguished itself through its comprehensive thematic approach, addressing sustainability from multiple perspectives:
This multidisciplinary framework enabled participants to understand sustainability as a complex, interconnected challenge requiring collaborative and innovative solutions.
The conference concluded with a valedictory function that celebrated the day’s intellectual achievements and outlined potential future collaborations. The national anthem served as a poignant reminder of the collective responsibility towards technological innovation and environmental stewardship.
MatTech 2024 was more than just a conference; it was a strategic confluence of ideas, research, and vision. By bringing together diverse stakeholders, the event demonstrated the transformative potential of collaborative innovation in addressing global sustainability challenges.
On October 14th, 2024, Toc H Institute of Science & Technology successfully hosted a World Standards Day program. The event was led by Mr. Peter Praveen, Assistant Manager at Bureau Veritas India Pvt Ltd, and garnered enthusiastic participation from 65 individuals, including 59 students and 6 faculty members.
The program focused on the pivotal role of global standards in driving progress across technology and industry. Mr. Praveen provided valuable insights into the numerous benefits of standardization, such as:
Furthermore, the program emphasized the importance of adhering to regulatory frameworks and highlighted the significant impact of standards on global trade and innovation.
This engaging event provided a valuable learning experience for all participants, fostering a deeper understanding of the crucial role of standards in shaping our modern world.
SLBS Marklance, a globally renowned educational institution, organized a comprehensive workshop on September 5, 2024, to familiarize final-year students of Mechanical Engineering with the promising field of Oil and Gas. Industry experts, Mr. Shameem, Mr. Abhijith, and Mr. Anandha Padmanabhan from SLBS Marklance, shared their expertise and experience, providing students with valuable insights into the career prospects and challenges within this sector.
The workshop covered a wide range of topics, including an overview of the global oil and gas market, career paths within the industry, essential skills and qualifications, and a job market analysis. Participants gained a clear understanding of the industry trends, potential career options, and the necessary skills to succeed in this dynamic field.
By attending this workshop, students were able to:
Department of Mechanical Engineering was proud to host a hands-on workshop on 3D Printing and Additive Manufacturing as part of the Udyama 1.0 initiative by the Government of Kerala. This initiative aims to foster entrepreneurship and innovation in the state by connecting academic institutions with industry.
The workshop led by Asst. Prof. Lovin K John and was held on Tuesday, 3rd September 2024 in the Tagore Hall. It was attended by senior secondary school, engineering, and polytechnic students. Participants gained valuable insights into the world of 3D printing and its applications in various industries. The workshop provided a practical learning experience that will equip students with the skills necessary for a successful transition from Industry 4.0 to Industry 5.0.
This event showcases Department of Mechanical Engineering’s commitment to providing students with relevant and up-to-date education.
Our department celebrated World Entrepreneurship Day on 22nd August 2024, in grand style with a captivating event. Our esteemed guest, Jose J Pulikkunnel from Trinity Engineers, delivered an inspiring keynote address that left our students brimming with entrepreneurial enthusiasm.
Mr. Jose Pulikkunnel shared invaluable insights, real-world experiences, and practical tips on turning innovative ideas into successful ventures. His words resonated deeply with our students and faculty, motivating them to embrace risk-taking, perseverance, and creative problem-solving.
Thank you to everyone who attended and made this event a success.
The Department of Mechanical Engineering successfully organized a tech talk on “Applications of Welding in Petroleum Refineries” on August 13, 2024, at 11:00 AM in Tagore Hall.
Industry experts, Mr. Sanal S and Mr. Mohammed Babu, both Senior Managers from BPCL Kochi Refinery, shared their invaluable knowledge on the critical role of welding in the petroleum refining process. The comprehensive talk covered a range of essential topics, including:
The event provided a valuable platform for students and faculty to engage in insightful discussions and expand their understanding of welding applications. TIST extends its gratitude to the speakers and BPCL Kochi Refinery for their support in making this event a success.
The Department of Mechanical Engineering, in association with United NDT, Kochi, successfully conducted a comprehensive hands-on workshop on Non-Destructive Testing (NDT) techniques on July 27, 2024 for final year Mechanical Engineering students. The workshop aimed to equip participants with practical knowledge and skills in various NDT methods.
The session was expertly handled by Mr. Vineesh P V, a seasoned Mechanical Engineer with over 16 years of experience in the oil and gas industry, specializing in NDT. He holds the esteemed ASNT NDT Level II certification in RT, UT, MPT, LPT, VT, and RTFI.
Workshop Highlights
This intensive workshop empowered participants with in-depth knowledge and practical skills in NDT techniques, enabling them to excel in various industrial applications.
On July 26th, 2024, the Department of Mechanical Engineering successfully conducted a practical workshop on the assembly and dismantling of Internal Combustion (IC) engines. The workshop catered to our fourth-year Mechanical Engineering students, providing them with valuable hands-on experience in a crucial area of automotive engineering. The workshop focused on the assembly and dismantling of Greaves 400 kVA diesel generator sets. A total of 35 enthusiastic students participated in the workshop, demonstrating their keen interest in the subject matter.
Program Highlights:
Through this immersive workshop, participants gained a solid foundation in IC engine technology, enhancing their practical skills and problem-solving abilities. They are now better equipped to analyze, troubleshoot, and maintain IC engines effectively.
The workshop received overwhelmingly positive feedback from the participants, who expressed their appreciation for the hands-on learning experience and the expert guidance provided. Building on this success, the Department of Mechanical Engineering plans to organize similar workshops in the future, covering other essential areas of automotive engineering.
The Department of Mechanical Engineering at Toc H Institute of Science & Technology, in collaboration with Bimit – an Autodesk Authorized Training Partner, successfully conducted a comprehensive 3-day Faculty Development Program (FDP) on Solid Modeling using Autodesk Fusion 360. Held at the CAD Lab from July 2-4, 2024, the program aimed to equip faculty members with advanced skills in 3D modeling and manufacturing simulation.
Day 1: CAD Design Fundamentals
Day 2: Advanced CAD Design
Day 3: CAM Simulation and Manufacturing
Program Outcome:
The FDP provided participants with a solid foundation in Autodesk Fusion 360, enabling them to create complex 3D models, simulate manufacturing processes, and enhance their overall design and engineering capabilities. The program fostered a collaborative learning environment, enabling faculty members to exchange knowledge and best practices.
About Bimit:
Bimit, an Autodesk Authorized Training Partner, brought their expertise in delivering high-quality training programs. Their experienced instructors provided hands-on guidance and support throughout the FDP, ensuring participants gained practical skills and knowledge.
TECHNICAL TALK : Alumni Interaction by Saurav S Kumar
It was a half day alumni talk with Saurav S Kumar who is working at PolyWork’s India as Application specialist. He passed out from Toc H Institute of Science and Technology in the year 2021. It was very informative talk as it had face to face interaction and an assembly interaction helping us to understand properly. The event started at 2 PM of 22.08.2023 and ended at 4 pm. The event was successful through the help of google meet application for the interaction. S7 and S5 students were attended the meeting. The talk signified on improving soft skills and being more assertive in presentation. The talk also was informative on the way to present a resume and signified the importance of project and events like hackathons done by other institutions. The talk prepared students to deal with interviews professionally and preparations on facing placements.
Dr M UTHAYA KUMAR, Post Doctoral (IIT) Professor, head & Director (International relations) Kalasalingam University Tamil Nadu, had visited Our college and Department at 9.30 am 20-6-2023.He had delivered a technical talk on advance manufacturing process. His talk was very useful for the faculties who were seeking Research opportunities. He had discussed the topic Research challenges and guide lines for organizing an international conference.
Dr PTD Rajan, Senior Principal scientist and Chairman of the Academic progress committee at the CSIR-National Institute for Multidisciplinary Science and Technology in Trivandrum, was visited our department at 10.30 AM on 01 April 2023. He had delivered a technical talk for S4 and S6 students at Tagore Hall. It was found very useful for students; in that he explained the future scope of “light alloys and composites for automotive and aerospace application”.
A 5day training program on solid works was conducted for S4 mechanical students from May 23rd to May 27th 2023. The training was found useful for students who are interested in 3D Modelling, Assembling and drafting. The Program was conducted by MOU Partner Eleation Pune in which students were taught Modelling, Assembling, drafting and Animation using the software.
Training Conducted for students of S6ME from 9/5/2023 to 19/5/2023 by Armtec Engineers Pvt Ltd. Students were provided exposure to various aspects of Mechanical Construction and Erection Jobs. The course was found useful for students seeking jobs in future
Anish Abraham (Technical Head) from Adi Institute of quality engineer’s cochin had delivered a session on QA and QC. The session was conducted for final year and 3rd year students on 21 th March 2023. It was found useful for students for there future career plans. Adi institute of quality engineers is a successful institute which offers various courses under skill development program for technical aspirants.
A one-day training on non-destructive testing was conducted for S5 Mechanical students by Metal scan Inspection services on 14/12/2022. The trainer Verghese P J delivered the session. The course was helpful for future students because the class included advanced techniques in NDT.
A technical talk on Hybrid Vehicles was conducted for S3 Mechanical Students on 19/12/2022 by Nippon Toyota. Mr. Harish trainer from Nippon Toyota delivered the session. The course would be useful for understanding the recent trends in automobiles.
